SP-CV60

Solar CCTV Power Kit

Continuous 24/7 power for 4 IP cameras, no grid needed

A pre-matched panel, battery and PoE injector bundle sized so a 4-camera station runs through a 5-day overcast stretch without load shedding.

MOQ: 20 kits
Lead time: 12–18 days

Quote this model Request datasheet

Certifications

CE
RoHS
IP66

Why buyers pick this model

4 × PoE ports plus 12 V and 24 V DC auxiliary outputs
LiFePO4 pack rated for 50 °C ambient sites
Pole or wall mount bracket included, IP66 enclosure

Technical specifications

Specifications below are the standard production configuration. Custom voltages, capacities and housings are available on request.

Standard configuration and ratings
Output	60 W continuous, 120 W peak
Solar panel	120 Wp
Battery	LiFePO4 12.8 V / 40 Ah
Autonomy	5 days at 12 W average
Controller	MPPT with low-voltage cutoff
Ingress protection	IP66 enclosure
Net weight	18 kg
Warranty	3 years

Where this model is installed

Typical deployment scenarios reported by our distributors.

Residential compounds
Construction sites
Farms and ranches
Parking areas
Telecom and remote monitoring
Remote and off-grid sites

Questions about this model

Which camera brands are supported?

Any 802.3af/at camera up to 30 W per port — Hikvision, Dahua, Uniview and Axis all work. Total budget is 60 W continuous, so four 12 W cameras leave headroom.

Can you pre-wire the whole station?

Yes. Send the camera layout and we deliver a labelled, factory-tested harness with the correct cable runs. Commissioning on site then takes about two hours.